CT06
13
4.0 Stopping the call cycle
• The call cycle can be stopped by entering code 12 in DTMF (defined as “stop code”) from
a telephone set a vocal call is being received from.
• The stop is made possible on those calls which send a voice type message with modes
represented by us in next schedule.
• If “stop code” is entered, the telephone call in progress and the whole following call cycle
are closed.
• If input causing the alarm is conditioned to the TC, if the TC goes ON during the call cycle,
the input terminates such cycle at the end of the telephone call in progress.
• Cycle stop can also be performed through local keyboard by introducing a valid
code [User code or installer code (if enabled).
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
10 s
5 s
0 . 5
s
5 s
10 s
5 s
0 . 5
s
5 s
10 s
5 s
0 . 5
s
5 s
WARNING AUTOMATIC CALL
FROM THE SMITH’S HOME
BURGLAR
ALARM
BEEP
WAIT
FOR BARRING
10 s
5 s
0 . 5
s
5 s
DIAL 12
CYCLE BARRED
Voice message structure
sent three times:
Example of barring:
