Elkron C420, Programming Manual

Page: 17 / 24

C420 Programming Manual 17
3.2.7 Printer
By selecting this menu item, the following menu which allows the user to recognize and configure the printer module is shown.
By selecting
‹‹ ENABLE
››
, one of the following messages is shown:

RECOGNITION ACTIVATED
if the module has not been recognized yet,

EQUIPMENT ALREADY ENABLED
if the module has been recognized already.
By selecting
‹‹ DISABLE
››
, one of the following messages is shown:
 EQUIPMENT DISABLED
if the module has been disabled correctly,

EQUIPMENT NOT PRESENT
if the module is not present.
By selecting
‹‹ INCLUDE/EXCLUDE
››
, if the module has been enabled and recognized the following menu is shown:
Otherwise, one of the following messages will be shown:

EQUIPMENT NOT PRESENT
if the module is not present,
 EQUIPMENT TO BE RECOGNIZED
if the module has not been recognized yet.
By selecting
‹‹
VERIFY
››
, one of the following messages is shown, depending on the state of the module:

EQUIPMENT TO BE RECOGNIZED
if the module has not been recognized yet,

EQUIPMENT ENABLED
if the module has been recognized already and is working correctly,

EQUIPMENT NOT PRESENT
if the module is not present.
3.2.8 LCD annunciator
By selecting this menu item, the following menu which allows the user to recognize and configure the LCD annunciator is
displayed:
By selecting ‹‹
ENABLE
››
, one of the following messages is shown:

RECOGNITION ACTIVATED
if the LCD annunciator has not been recognized yet,

EQUIPMENT ALREADY ENABLED
if the LCD annunciator has been recognized already.
By selecting ‹‹ DISABLE
››
, one of the following messages is shown:

EQUIPMENT DISABLED
if the LCD annunciator has been disabled correctly,

EQUIPMENT NOT PRESENT
if the LCD annunciator is not present.
By selecting ‹‹
INCLUDE/EXCLUDE
››
, if the LCD annunciator has been enabled and recognized the following menu is
shown:
Otherwise, one of the following messages will be shown:
 EQUIPMENT NOT PRESENT
if the LCD annunciator is not present,

EQUIPMENT TO BE RECOGNIZED
if the LCD annunciator has not been recognized yet.
By selecting ‹‹
VERIFY
››
, one of the following messages is shown, depending on the state of the LCD annunciator:

EQUIPMENT TO BE RECOGNIZED
if the LCD annunciator has not been recognized yet,

EQUIPMENT ENABLED
if the LCD annunciator has been recognized already and is working correctly,

EQUIPMENT NOT PRESENT
if the LCD annunciator is not present.
> ENABLE
DISABLE
INCLUDE/EXCLUDE
VERIFY
PRINTER
> INCLUDED
EXCLUDED
> ENABLE
DISABLE
INCLUDE/EXCLUDE
VERIFY
LCD ANNUNCIATOR
> INCLUDED
EXCLUDED