- 13 -
^
^
^
^
°C
E
N
- only possible from the default display by pressing and holding the
hidden button
- the display indicates
ProG
- by short presses of the buttons
^
^
, you can toggle between
display
ProG
and
SEt
- by pressing and holding the button
^
you select entry into the
setting of time programs (
ProG
) or into the menu (
SEt
)
End
- time of end of
the program step,
range 12:10 a.m. -
12:00 a.m., increment
10 minutes
t °C
- required
temperature in the
program step, range
from temperature
ECO
to 40.0 °C, step 0.5 °C
The programming step number is indicated on the lower bar graph by the number of displayed lines (1-6). The day of the
week for which the given program step is set is displayed in the upper corner of the display.
If the program type „working day / weekend“ is selected, then for working days the symbols „1“, „2“, „3“, „4“, „5“ are displayed,
and for the weekend „6“, „7“.
If the program type „every day the same“ is displayed, then for working days the symbols „1“, „2“, „3“, „4“, „5“, „6“ and „7“ are
displayed.
If a programming step is to remain unused, dashes are set in the item
StA
.
