fig. 1
fi
1
fig. 1
fig. 2
fi
2
fig. 2
fig. 3
fi
3
fig. 3
fig. 4
fi
4
fig. 4
CONTROL / BLINDS
Blinds Menu
is designed to control all shutters, blinds, awnings, gates and garage doors that have a built-end switch.
Touch the
Louvre
(Fig. 1)to display selection of names you created in menu (Fig. 2).
Red / Green LED indicates device status: green- closed blinds red – open blinds.
Main Menu / Blinds
Touch the desired description / name of the device to display features:
Open Close
First you need to measure time "
t
" which your device needs to fully open / close.
Touch
open
icon
for more than 3 seconds to put (Fig. 3) device into the end position. Then touch
close
icon
longer than
3 seconds to retract indicate the device while in motion, measure time "
t
" - a period during which the equipment is in motion.
Under
Settings
you touch on a time interval of hours (minutes) mark
information you want to change. Arrows
/
set me-
asured by time
"t " + 2s
Pulling into the field and the same time and in the field of load (Fig. 4). Confirm the time by pressing
OK
.
Note: longer pressing the arrow is accelerated shift to the figures.
A short touch on
Up /
Down
can control the devices in the desired direction. Touch longer than 3 devices place the desired
end position.
Blinds / Functions
36
t+2s