fig. 1
fi
1
fig. 1
fig. 2
fi
2
fig. 2
fig. 3
fi
3
fig. 3
fig. 4
fi
4
fig. 4
fig. 5
fi
5
fig. 5
fig. 6
fi
6
fig. 6
fig. 7
fi
7
fig. 7
fig. 8
fi
8
fig. 8
Change Password
: Changes the password for
Setup
menu. Enter password - Figure 5 (default password
1111
)
will start the the screen to select a
new password
- where you type and confirm new password. Touch
OK
to save the
new password (Fig. 6).
Reset the device:
To reset the password use 1234 (Fig. 7). This password cannot be changed. Password, and confirmation
YES (Fig. 8) to return the RF Touch unit to the factory settings. RF Touch restarts without entering the password confirmation
OK
. (Settings remain unchanged)
Setup / Others
(fig. 3-4)
Setup / Display
(fig. 1-2)
Background:
select the type of screen background color (black, blue, green, purple).
Screensaver:
the desired brightness (25%, 50%, 75%, 100%) will be activated after
preset time since the last touch (15s, 30s, 1min, 3min).
Sleep mode:
set the time after which RF Touch screen unit goes to sleep - the screen
goes dark (0min, 10min, 15min, 20min).
Calibrating the display:
cross appear in every corner of the screen, which need to be
pressed twice. Calibration will be performed. Display calibration can also be
started by resetting the unit or disconnecting the supply voltage from the unit;
after connecting again, the RF Touch logo will appear on the display - hold the
logo for more than 3s to activate calibration – touch logo longer than 3 seconds
and calibration will be activated. After calibration, the display shows Home screen.
SETUP
24