02-5/2018 Rev.0
RFPM-2M
Made in Czech Republic
5/7
ELKO EP, s.r.o. | Palackého 493 | 769 01 Holešov, Všetuly | Czech republic | e-mail: [email protected]
EN
Support: +420 778 427 366
www.elkoep.com
Energy gateway
EN
External setup
- setting for external inputs
In the fi rst column - external inputs
•
Name
•
Unit of measurment
– measured quantity
•
Pulses
– number of pulses per unit of measured quantity
External RFPM-2 inputs and security settings
Services
- set up a new password and access to iMM
Web interface
•
Admin password
– set a new password for web access
iMM (iNELS Multimedia)
•
Admin password
– password for the Administrator account
•
User password
– the password for the user account
After all the changes you made, you must save the entire settings with the
Save
button and apply the changes made by
clicking
Apply settings
.
System - System settings
This tab is primarily used to update the fi rmware.
The current fi rmware is available at https://www.elkoep.com/energy-brana-rfpm-2m.
Download the fi rmware by selecting a fi le on your computer and upload it to RFPM-2. After the new fi rmware is loaded, the power
can be retrieved for several minutes.
Bootloader
Serves for FW updates.
Bootloader input - power off , press button, and hold button> 2s when the power is on.
After the FW update, the RFPM-2M will run within 30-60 minutes.