User instructions
ELKO Link Home R/TV Module
Application
The amplifier module is to be used exclusively in
the ELKO Link Home system.
The module is a Quality Grade 2 product and is a
non-cascadeable amplifier, including return path,
used for both cable radio- and TV-signals. The main
radio-/TV-signals con-nected to the input are splitted
into 6 parallel outputs, where 2 of these also inclu-
des a return path (marked ”Outputs sup. ret. path”).
The frequency band supported by the return path
emerges from the type of the individual amplifier as
follows.
Further, an extra port is supporting the ELKO
Link Home AV link, and is as such available as input
for AV-signals (marked ).
Signals from ELKO Link Home modulators con-
nected to this port are mixed with the main signals
and distributed to all 6 output ports.
The amplifier module is supporting the ELKO
Link Home IR link system. All 6 output ports are
able to receive “IR signals” from ELKO Link Home
IR receivers.
Construction
The module is a fully shielded unit made in 10'' for-
mat, 10'' wide and 1 Height unit. On the front, as
shown in Fig. 1, there are 7 shielded RJ45 ports
avail-able to the user. Also a green LED indication
for Power, adjustment for the gain, and an output for
the IR link are located on the front.
On the back of the module, as shown i fig 2, a 2
pole connector for Power supply ( 12 V DC ), a F
connector for the incomingt radio-/TV signals are
located.
NB 312
02.03.05
Rev.1.1
WF
R/TV Module EL 1030 (5-30 MHz)
ELKO P/N 6854
N 69 426 45
S 51 860 22
FIN 72 042 54
R/TV Module EL 1055 (5-55 MHz)
ELKO P/N 6860
N 69 426 69
S 51 860 26
FIN 72 042 50
R/TV Module EL 1065 (5-65 MHz)
ELKO P/N 6861
N 69 426 70
S 51 860 27
FIN 72 042 51
Type
EL 1030
EL 1055
EL 1065
Return Path
5 - 30 MHz
5 - 55 MHz
5 - 65 MHz
Figure 1: Front view of the Antenna module
Figure 2: Back view of the Antenna module
2 pole connector for
Power supply
F-connector for incoming
Radio-/TV signals
