Pairing the device
Pair your Smart Tag with the
ELKO SmartHub
to access and control the Smart
Tag using the ELKO smart app.
• We recommend to configure your main Smart Tag as
Grid
on the main
incomer of the house. This helps to record the overall consumption.
NOTE:
◦
Grid:
main supply (referred as
Grid
in the app) of the house.
◦
Load:
power consumed from the Grid or a production source by
electrical devices such as light, water heater, and fridge.
• If you have more than one Smart Tag installed, it is recommended to pair the
main Smart Tag first and set it as Grid. Refer to
and then pair the additional Smart Tag.
NOTE:
◦
Main Smart Tag is connected to the Grid.
◦
Additional Smart Tag are connected to the loads.
IMPORTANT:
Smart Tag must be installed by qualified professional.
Pairing device manually
To pair the device manually:
1. On the
Home
page, tap
+
.
2. Tap
, select the required
ELKO SmartHub
on the slide-up menu.
3. Select an option to add the device (A):
–
Add Device with Install Code
–
Add Device without Install Code
Add Device
Install Code is Recommended
Add Device without Install Code
A
TIP:
It is highly recommended to add the device with install code.
8
DUG_Smart TagE_ELKO-00
Summary of Contents for EKO01824
Page 31: ......
