Page 7
2000000557 (Rev. B - 06/22)
LZO8WSN_2A
Service: Inspection/Replacement
1.
Lower Front Panel and Upper Shroud: To access the refrigeration system and plumbing connections, remove four screws from bottom of
cooler to remove the lower shroud. To remove the upper shroud for access to the sensors, regulator, solenoid valve or other
components located in the top of the unit, remove lower shroud, disconnect drain, remove four screws from tabs along lower
edge of upper shroud, unplug two wires and water tube.
2. Bubbler
: To remove the bubbler, first disconnect the power supply. The underside of the bubbler can be reached through the access panel
(Item 25, Fig 11) on the underside of the upper shroud. Remove the access panel by removing the retaining screw.
To remove the bubbler, loosen locknut from the underside of the bubbler and remove the tubing from the quick connect fitting per the
Operation Of Quick Connect Fittings section in the General Instructions. After servicing, replace the access panel and retaining screw.
Replacement Parts: WaterSentry Filter Parts List
Item No.
1
2
Part No.
51300C
0000000746
Description
Filter Assy - 3000 Gallon
Assy-Filter & Bracket includes
Fltr Head/Mtg Bkt/
John Guest Ftgs/Screws
11
Basin
Locknut
1
WATER FILTER EXPLODED VIEW
•
Inspect Bottle Filler and Cooler twice each year for proper operation and performance.
•
Inspection of the unit will require disconnecting electrical supply, removal of panels, etc. and
reassembly and return to service practices.
Figure 9
Figure 10
Figure 8
2
3/8”
Water
Inlet
11
NOTE: When installing replacement bubbler and pedestal, tighten
nut only to hold parts snug in position. Do Not Overtighten.
