ASSEMBLY
OF
THE
CAR
-
STEERING WHEEL
AA batteries must be inserted in the steering wheel.
1. Use a screwdriver to remove the screw on the battery
cover
in the middle of the steering wheel.
2. Remove the battery cover from the top of the battery
compartment.
3. Insert two AA batteries in the correct polarity.
4. Place the battery cover on the battery compartment a
fasten with the screw you removed in the first step.
Remove the M5x35 bolt and Ø5
nut from the steering wheel.
5. Place the steering wheel over
the steering rod protruding in the
middle of the steering wheel base.
6. Align the holes on both sides of
the steering wheel with the holes
at the end of the steering rod.
7. Tighten the nut on the opposite
end of the bolt to secure the
steering wheel to the steering
column.
CAR
ASSEMBLY
-
POWER SUPPLY
1. Connect the vehicle connector to the engine
connector as shown. On the other hand, repeat.
2. Insert the red fuse connector into the battery
terminal
ASSEMBLY
OF
THE
CAR
-
ENGINE COVER
1. Attach the engine cover to the engine.
2. Tighten the four Ø4x12 pan head screws and secure.
Repeat the above steps for the second engine cover.
The final activities in assembling the toy car are
: Fitting the seat (position and snap the seat, tighten with two M15X16 screws),
windscreen snap, rear view mirrors, rear spoiler.