(0=OFF, 1=Low, 2=Medium, 3= High).
To turn the fan on, press the desired button switch.
Oscillation Control
To make the fan oscillate, push down on the oscillation knob located
on the top of the motor housing. To stop the fan from oscillating, pull up
on the oscillation knob when the fan is in the desired position.
Tilt Control
The airflow can be adjusted upward or downward by tilting the fan
head as desired.
• UNPLUG the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water to drip into
the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the
fan.
• Remove the Front Grill.
• Unscrew the Spinner (blade knob) by turning it
CLOCKWISE
(REVERSE THREAD).
• Pull the Fan Blade away from the Motor Housing.
• Gently wipe the Fan Blade and Grills with a damp cloth.
• Re-assemble the fan by following the last three steps in
ASSEMBLY
OF BLADE AND GRILLE.
• For storage, disassemble and clean the fan carefully as instructed
and store in its original box. You may leave the fan assembled and
covered to protect it from dust. Store the fan in a cool, dry place.
