9 - EN
EWHT800LX
English
STEP
colour
ON
BLINKING
OFF
1...8
green
individual LED ON:
STEP in progress
individual LED:
duty cycle (STEP) not started
Note: only one LED can be
blinking
individual LED:
duty cycle (STEP) not started
LED 1,2,.., n (n=2,...7) ON:
Climate profile consisting of 2,3,..,7 STEPS
STEP 1,2,.., n completed successfully
ALL LEDs ON:
Climate profile consisting of 1 or 8 STEPs:
Climate profile completed successfully
ALL LEDs OFF:
climate profile ready to start
individual LED: cycle STOPPED
LED Climate Profiles
CLIMATE PROFILES
EWHT800LX manages curing cycles by means of climate profiles consisting of 8 STEPS.
Each STEP is defined by a set of 10 parameters.
The parameters determine STEP activation delays, duration, type of humidity and temperature regu
-
lation, setpoint for regulation, activation of relay AUX1/2 and procedures for completing one STEP
and switching to the next.
By default, regulation is disabled and the setpoints are all zero. The auxiliary relay is enabled
The climate profile START or STOP command is activated by briefly pressing the START/STOP RESET
key (E).
The climate profile RESET command is activated by pressing and holding the START/STOP RESET key
(E).
Example
3-STEP climate profile and temperature/humidity regulation in Neutral Zone mode. The first STEP
starts with a delay while the others start on completion of the previous STEP. The Humidity Setpoint
is fixed whereas the Temperature Setpoint is variable.
Temperature / Humidity
Time
Step1
Step2
Step3
Set Point
Humidity
Step 1
End Mode
Endurance 2
Endurance 3
Endurance 1
Delay 1
Set Point
TemperatureB
Active humidity
regulator
Active temperature
regulator
db 1/2
db 1/2
db 1/2
db 1/2
Set Point
TemperatureA
db 1/2
db 1/2
