3.3 Audio Settings
Installation
After setting the Video Settings you have to set up the Audio settings. Depending on the unit you have dif-
ferent options are shown for the set up.
As followed the Audio installation is shown.
▪ To move between the different options you have press the Up or Down button (7).
▪ To select one setting you have to press the OK button (10).
▪ To change the value you have to press the Plus or Minus button (8).
▪ Values you can set up:
›
Mono - Stereo:
Here you can select between Mono and Stereo Output on the Left and Right Audio
Output.
›
Balance:
Here you can select between Left, Center and Right to adjust the Audio Balance.
›
MPEG - AC3:
Here you can select between two formats: MPEG (as Standard) or AC3 (if you use a
connection to a Digital AC3 AV Receiver).
▪ To save the adjustment of the OSD installation you have to press the Exit button (9).
▪ To leave the OSD installation set up you have to press again the Exit button (9).
19
