Installation
3.2 Video Settings
After setting the OSD you have to set up the Video settings. Depending on the unit you have different op-
tions are shown for the set up.
As followed the Video installation is shown.
▪
To move between the different options
you have press the Up or Down button
(7).
▪
To select one setting you have to press
the OK button (10).
▪
To change the value you have to press
the Plus or Minus button (8).
▪
Values you can set up:
›
PAL:
Here you can select between Picture Aspect, Picture Format, Contrast, Brightness and Satu-
ration.
›
Scart:
Here you can select between the Scart Output Format, Red - Green - Blue colour adjust-
ment.
›
YUV - DVI:
Here you can select between the Output Format 576p 50 Hz, 720p 50/60 Hz and diffe-
rent options.
▪
To save the adjustment of the OSD installation you have to press the Exit button (9).
▪
To leave the OSD installation set up you have to press again the Exit button (9).
18
