3.3 Channel search DVB-S
Installation
In the following the channel search is described:
After correct set up of the antenna on the screen of your TV set the next
installation Menu „channel search“ is shown.
▪
With the Plus/Minus button (8) you can change the satellite. Here you have to
select the satellite you have set up in the antenna installation Menu.
In this Menu the signal strength and quality is indicated. Also it is indicated with
an acoustic sound. If the strength and quality increase the acoustic sound get
higher. For acceptable receiption the indication should reach the green coloured
area.
There are four options for the channel search:
▪
Automatic:
All on the satellite available chan-
nels are searched.
▪
Automatic FTA
: All on the satellite available
Free TV channels are searched.
▪
Semi Automatic:
Searching for particular
channels of a transponder.
The following parameter must be adjusted:
›
Frequency: Set up the transponder
›
Polarisation: H (horizontal); V (vertical)
›
SR: Symbol Rate
▪
Manual:
Searching for a particular channel.
The following parameter must be adjusted:
›
Frequency: Set up the transponder
›
Polarisation: H (horizontal); V (vertical)
›
SR: Symbol Rate
›
Name (of the particular Channel)
›
Video PID
›
Audio PID
›
PCR PID
After finished search you have to save the found
channels by pressing the Menu button (11).
Channel search on an other satellite
▪
To search channels on an other satellite you have to repeat the above set
up. But before you have to install the new satellite in the antenna installa-
tion.
▪
Go to Main Menu / Configuration / Installation / Antenna and repeat the set
up instruction in paragraph 3.2 described.
▪
Go to Main Menu / Configuration / Channel search.
▪
Now you can search for channels on an other satellite using the instruc-
tion above.
25
Summary of Contents for Elipsus CI 230 C YUV
Page 1: ...Operating Instructions...