Installation
3.1 OSD Installation
After switching on the Elipsus with the StandBy button (1) of the Remote Con-
trol you should see on the TV set a welcome screen. Now you can start set up
the installation.
As followed the OSD installation is shown.
▪
To move between the different input windows
press the Up and Down button (7).
▪
To change the settings of an input window
press the Plus/Minus button (8).
▪
To enter a username in the input window you
have to press the Numeric buttons (2) repea-
ted till you receive the correct character.
▪
Values you can set up:
› Language:
Here you can select between 4 OSD languages: German, Eng-
lish, French or Italian.
› Username:
(see above)
› Remote Control:
Here you can adjust if by zapping with the Up and Down
button (7) the current channel will be switched plus one or minus one. That
means if you zapp up by pressing the Up button (7) that should be swit-
ched upwards (-1) or downwards (+1).
› Audio:
Here you can select between two formats: MPEG (as Standard)
or AC3 (if you use a connection to a Digital AC3 AV Receiver).
› Audio Language:
Here you can select between three languages for chan-
nels which are broadcastet in multilanguage which is for example the euro-
pean channel Arte.
› Transparency:
Here you can adjust the transparency of the OSD (On
Screen Display).
› OSD Timeout:
Here you can adjust the lenght of the OSD should be
shown on screen.
› Position:
Here you can adjust the position of the display. You can select
between 0°, -90° and +90°, if you place the Elipsus on one of sites.
› HDD Sleep:
Here you can adjust after what time the Harddisk Drive
should go in sleep mode when it is not used.
› Display:
Here you can adjust if the name of a channel or the title of a pro-
gram should be shown on the display.
› Brightness:
Here you can adjust the brightness of display when the Elip-
sus is on as well as the Elipsus is in StandBy mode.
› Contrast:
Here you can adjust the contrast of the display.
▪
To save the adjustment of the OSD installation you have to press the
Menu button (11).
▪
To leave the OSD installation set up you have to press the Exit button (9).
You can change at any time the set up of OSD installation using the path Main
Menu / User / OSD.
23
Summary of Contents for Elipsus CI 230 C YUV
Page 1: ...Operating Instructions...