V700L Managed Single Master / Slave LAN Extender
USER’S MANUAL Ver. B.2
79
5. Symptom:
Connected the V700L Master side with Slave side within 300 meters RJ-11 phone cable got only
less than 10 Mbit/s.
Cause:
Some testing program which is base on TCP/IP protocol such as FTP, Iperf, NetIQ, the bandwidth of
testing outcome will be limited by TCP window size.
Solution:
We recommend to test V700L bandwidth best by Smartbit equipment, if you don't have Smartbit, we
recommend test that by IPERF program, and TCP window size must be settled max. 64k, the
parameter as iperf
–c server IP address –i 1 –t 50 –w 65535 for client side.
6. Question:
I just bought a V700L to replace my Quest DSL modem for my home. I was told any VDSL2 modem
would replace and give me higher communication speeds. It doesn’t get me internet when hooked up.
All lights come on but no Link light. Is this the complete wrong application for this unit?
Answer:
Re: Please note V700L is a Master (CO side), it must be connected to the V700L Slave(CPE side) to
work. Band profile and band plan setting must be compatible to each other .
