54
In the IRQ Resources submenu, if you assign an IRQ to Leg-
acy ISA, then that Interrupt Request Line is reserved for a
legacy ISA expansion card. Press <Esc> to close the IRQ Re-
sources submenu.
In the Memory Resources submenu, use the first item Re-
served Memory Base to set the start address of the memory
you want to reserve for the ISA expansion card. Use the sec-
ond item Reserved Memory Length to set the amount of
reserved memory. Press <Esc> to close the Memory Re-
sources submenu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be
caused by some non-standard VGA cards. This board in-
cludes a built-in VGA system that does not require palette
snooping so you must leave this item disabled.
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device
connected to the PCI interface on your system.
