1
Esprit Tech
Date: 11.12.2020
(1) 321.729.4287
P.O. Box 360815
Version: 1.03
Support
@
EspritTech.com
Melbourne, FL
https://
www
.EspritTech.com
32936, USA
U
SER
M
ANUAL
F
EATURES
The Voltario T60 is a high performance digital dual battery backer with advanced telemetry features. It contains a
charging circuit and touch switch functionality. The device is ideal for mid-size models where high-voltage servos are
used without voltage stabilization.
Voltario T60
is suitable for models equipped either with dual receiver batteries, or with ESC battery eliminator
circuit (BEC) used as a primary power source, combined with a small backup battery. The device prefers its primary
battery input, while in case of voltage drop it automatically switches to the secondary input. The charging circuit may
be optionally enabled to charge the secondary battery from the primary input/BEC.
Voltario T60
is designed to turn on/off the electronics in your model, it can replace a mechanical switch as well. The
device remembers its last operating state, and if the battery is accidentally disconnected, the Voltario will
automatically boot up again as soon as the battery is connected again.
Intelligent dual battery backer/multiplexer with configurable voltage switchover threshold.
Touch switch function.
Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner Hott telemetry support (current, voltage, capacity of both
battery inputs).
Optional charging of the secondary battery.
Remembers the last operating state.
Voltario T60-C
Voltario T60 JR
Dimensions
36x19x6mm
36x19x6mm
Weight incl. cables
23g
17g
Cables
1mm
2
(17AWG)
0.5mm
2
(20AWG)
Connectors
-
Standard JR
Continuous current
15A
Peak current (2s)
30A
Standby current
50 µA
Operating current
40mA
Charging current for Batt.2
up to 200mA
Operating temperature
-20 to 85°C
Supply Voltage
4 – 12.6V
Recommended Supply Voltage
5-8.4V
Telemetry
Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
Touch switch support
Yes
BEC
No
Selectable touch / mechanical switch/ RC switch
Yes
Status LED´s
Yes
I
NSTALLATION
Plug the device between receiver and a primary battery/BEC. Connect the secondary battery to the B2 input.
Dual battery installation (without BEC):
T60-JR
T60-C
