Elite Learning Universal Remote Control
– R800D
Ver. 1.1
www.elitescreens.com
/
/ Page 12 of 23
+
Remark:
1. In case of you did not stop the search on time when device reacted, you may press the
or
key to search
back to find the passed code.(for example, your DVD reacts when the digital is 048 on the LCD, but you do not
press any key to stop the searching process synchronously, so the searching process goes on automaticaly. when
you press any key to stop the searching process,now the didital nember is already 050. Of course,when you press
the POWER or CH+…etc to control your DVD, your DVD will not react.But you can press the
key one time,you
will see the digital number
changes to 049,and press the POWER or CH+…etc to control your DVD, of cours your
DVD will not react again;and press the
key one time again,you will see the digital number on the LCD changes
to 048,and press the POWER or CH+
…etc to control your DVD, this time your DVD will react, then just press the
key
OK
to store it
)
2.The keys of
OK, EXIT
are only used to set-
up your new remote control during the Auto Search, you can’t
control your device for menu function at the moment until you quit from the set up.
3. When remote control searches through all codes, the remote control will stop at the beginning code of the search.
4. If the device is locked, you must first unlock the device then set up.
5.
Please remember this digital number for your DVD control,because you can enter this digital number when
you use “SET-UP by inter code” quickly next time.
☆
3: Set-up by Enter Code
(suitable for TV,DVD,VCR,AUX1, AUX2,SAT)
1. Switch on the device, which you would like to control (e.g. TV set).
