Elite PRO-530HD Training Manual Download Page 8

Page: 8 / 65

INPUT jacks

The monitor is equipped with input jacks 1 to 6.
Refer to the following explanation for information about each
jack.

COMPOSITE VIDEO INPUT jacks

There are 4 sets of inputs for VCR and DVD/LD players. Use
RCA-type pin plug cords (the same as those used in Hi-Fi
systems) for connections. When the audio source to be
connected is mono, connect the source to the L-(MONO) jack.

S-VIDEO INPUT jacks

• Inputs signals from a DVD/LD player that has an S-VIDEO

output jack.

• When the signal input from the S-VIDEO INPUT jack is output

from the MONITOR/TV OUTPUT jack, the output signal will
be a composite of Y and C.

COMPONENT VIDEO INPUT jack

Inputs three signals – Y, P

/ C

and P

/ C

– output from DVD

players and the like.

CONNECTING VIDEO/AUDIO EQUIPMENT

NOTE:

When the 3 signals, RGB signal, composite signal, and S signal,
are simultaneously input to INPUT 3, the RGB signal will be
displayed on screen.

NO)

RGB

INPUT 3

INPUT

COMPONENT VIDEO

INPUT 1 PROFESSIONAL

INPUT 1 INPUT 2

INPUT 2

INPUT 3

INPUT 1

VIDEO

INPUT

INPUTS

VIDEO

AUDIO

INPUTS

OUTPUT

INPUT

CENTER

/TV

MONITOR

/VAR

FIXED

AUDIO

VIDEO

SIGNAL

AUDIO
R

RGB

OUTPUT

Digital tuner

VIDEO

OUTPUT

INPUT 4

S-VIDEO

L-AUDIO-R

VIDEO

(MONO)

S-VIDEO

Video movie/VCR

Front panel

RGB INPUT jack

Inputs five signals – R, G, B, H and V – output from digital
tuners and the like.

Digital tuner

1080 i

33.75 kHz

60 Hz

Horizontal

Vertical

Format

frequency

Input format in which images can be received.

NOTES:

• SPLIT screen, FREEZE screen and SEARCH screen functions

cannot be used when 1080i or 720p component signals are input.

• Signals from MONITOR/TV OUTPUT jacks will not be output

when component signals or RGB signals are input.

• The RGB input jack is designed for use in connecting a digital

tuner with RGB signal output, and it should accordingly never
be used for connecting to a personal computer or other device.

480 i

15.734 kHz

60 Hz

DVD player, etc.

480 p

31.468 kHz

60 Hz

720 p

45.00 kHz

60 Hz

1080 i

33.75 kHz

60 Hz

Digital tuner, etc.

480 p

31.468 kHz

60 Hz

Horizontal

Vertical

Format

frequency

Input formats in which images can be received.

Summary of Contents for PRO-530HD


































































Search results

Summary of Contents for PRO-530HD

Reviews:

Brands by name

Popular brands

Elite PRO-530HD, Training Manual

Search results

Summary of Contents for PRO-530HD

Reviews:

Brands by name

Popular brands