manualshive.com logo in svg

Elite PRO-530HD, Training Manual

Share
Download
Elite PRO-530HD Training Manual Download Page 26

 
 

Tuner, Video and “S” Input Block Explanation 

(See Pages 1

7

 and 1

8

) 

 

Main Picture (Tuner or Composite) 

Input switch (IC2201) receives signals from the tuner, inputs 1 ~ 3 and the front 
input (input F). Signals from the tuner or composite signals from inputs 1,2,3 or F 
enter IC2201 and the user selected output for the main picture goes to IC2503. 
IC2503 is a 3D Y/C separator for the main picture composite signals. After the 
composite signals have been changed to 3D-Y/C signals they enter IC2803 and the 
color demodulator inside this IC changes the signals to Y/CB/CR. IC2803 also 
separates the horizontal and vertical sync. All signals at this point are sent onto the 
progressive unit for I/P conversion. All signals entering the progressive unit are 
converted to 480P at 31K or 1080I at 33K (user selectable). Signals entering the 
progressive unit are converted to digital and resized for the user selected screen 
mode and scan mode. The output signals from the progressive unit are converted 
back to analog and the Y/CB/CR signals pass through switch IC4305 and go into the 
sharpness and detail correction IC (IC4301) or bypass IC4301 through switch 
IC4306 and enter IC4608. All picture, color correction and sync processing is done 
inside IC4608. The output processed RGB signal from IC4608 is sent to the CRT 
drive PCB’s. 
 

Main Picture (“S”) 

Inputs from the “S” connectors (inputs 1,2,3 and F) are user selected by IC2201 and 
outputted to IC2503 as Y and C signals. Since these signals are already separated 
IC2503 simply passes the signals through onto IC2803. From this point the signal 
path is exactly the same as (Tuner or Composite). 
 

Sub Picture (Tuner, Composite or “S”)

 

The sub picture path is used for the twin picture function and the multi picture 
tuner scan feature. Any signal input into IC2201 can be used for the sub picture 
output. The user selected sub picture output from IC2201 goes to IC2701 for Y/C 
separation if the signal is Tuner or Composite. If the signal is of the “S” type it 
simply is passed through IC2201 and enters IC2806 for color demodulation and 
sync separation. The outputted Y/CB/CR and sync signals are then sent to the 
progressive unit for twin picture or multi picture processing.    

              

 

Summary of Contents for PRO-530HD


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands