6
ASSEMBLY
Step 8
Attach the pulse handlebar(8) to front post(6),
fix it with 4 sets of screwф6x12(31), washer
ф6(32).
Attach computer (13) to computer holder, fix it
with 4pcs screws (33), connect the upper sen-
sor wire(35) and pulse wire(34) to computer.
PROGRAMS
KEY FUNCTIONS
A. ENTER(PROGRAM): Chooses the functions from PROGRAM, GENDER, TIME, HEIGHT,
WEIGHT, DISTANCE, WATT, TARGET HEART RATE, AGE, and 10 columns. The chosen function
shall flash. Please note that not all the functions can be selected in every program according to the
type of each program.
B. START/PAUSE: Starts or stops the program chosen, and resets the monitor by pressing and hold-
ing for 2 seconds.
C. MODE: Changes the displays of the values between RPM and SPEED, between CAL and WATT.
The values of RPM and WATT show at the same time, or the values of SPEED and CAL do by press-
ing it.
D. UP (┼): Selects or increases the values of PROGRAM, GENDER, TIME, HEIGHT, WEIGHT, DIS-
TANCE, WATT, TARGET HEART RATE, AGE, and 10 columns.
E. DOWN (─): Selects or decreases the values of PROGRAM, GENDER, TIME, HEIGHT, WEIGHT,
DISTANCE, WATT, TARGET HEART RATE, AGE, and 10 columns.
F: RECOVERY(If have): Press this button going into pulse recovery detecting.
ABOUT DISPLAYS
A. START: Indicates the program selected has started.
B. STOP: Indicates the program selected has stopped. Users are free to change the programs and
the value of functions applied.
C. PROGRAM n: Indicates the program selected from Program 1 to Program 16.
D. LEVEL n: Indicates the level of loading selected from Level 1 to Level 16.
E. Indicates the gender selected (Male or Female).
F. Loading Profile: There are 10 columns of loading bars, and 8 bars in each column. Each column
represents 3 minutes workout (without setting of TIME value), and each bar represents 2 levels of
loading.