Elite EVBS-26, Operating Instructions And Parts Manual

Page: 6 / 36

6 Vertical Band Saw
33. Never leave the machine running unattended. Turn the power off and do not leave the machine until it comes to a
complete stop.
34. Be sure that the blade is not in contact with the workpiece when the motor is started. The motor shall be started and you
should allow the saw to come up to full speed before bringing the saw blade into contact with the workpiece.
35. Adjust upper guide to clear workpiece. Hold workpiece fi rmly against table.
36. Direction of feed — feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
37. Installation work and electrical wiring must be done by qualifi ed electrician in accordance with all applicable codes and
standards.
38. Do not remove jammed pieces until blade has stopped.
Familiarize yourself with the following safety notices used in this manual:
4.0 INTRODUCTION
This manual is provided by JET
®
covering the safe operation and maintenance procedures for a JET Model EVBS-26.
This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instruc-
tions and parts breakdown. Your machine has been designed and constructed to provide years of trouble-free operation if
used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site:
www.jettools.com. Retain this manual for future reference. If the machine transfers ownership, the manual should accom-
pany it.
!
This means that if precautions are not heeded, it
may result in minor injury and/or possible machine
damage.
!
This means that if precautions are not heeded, it
may result in serious or even fatal injury.