4
HOW TO USE YOUR BLENDER
1.
Set the base on a flat, stable surface. Put the jar into the base and turn
it counterclockwise to lock it in place. Make sure that the jar is firmly
locked in place, otherwise the safety switch will not activate and the
blender will not operate. (Figure 1)
2.
Pour ingredients into the jar, making sure not to overfill it. (Figure 2)
3.
Place the lid onto the jar. (Figure 3)
NOTE:
Never operate the blender without the lid in place.
4.
Plug the power cord into a standard 120V electrical outlet. Press or hold
the pulse switch to process your ingredients.
(
Figure 4)
CAUTION: NEVER INSERT HANDS OR UTENSILS INTOTHE JAR WHILE
THE BLENDER IS IN OPERATION.
5.
Once you are done mixing, wait until the blades have stopped spinning
and then unplug the power cord from the electrical outlet. Remove the
lid if desired; the lid comes with a drinking spout so it can be left on the
jar when serving. (Figure 5)
6.
Twist the jar clockwise to remove it from the base. (Figure 6)
5
BLENDING TIPS
•
Do not chop or process hard foods such as cheese, crackers or meat.
•
A maximum of 12 tablespoons (180ml) of coffee beans can be ground at
a time.
•
If blending action stops during blending or ingredients stick to sides of
the jar, turn blender OFF, remove the lid from the jar, and use a rubber
spatula to push mixture toward blades.
NOTE: TO PREVENT SEVERE PERSONAL INJURY, NEVER INSERT
HANDS OR UTENSILS INTO THE BLENDER WHILE IT IS IN
OPERATION.
•
Do not process hot foods or liquids in blender.
•
Do not store food or liquids in the blender jar.
•
Avoid bumping or dropping the blender.
•
ALWAYS TURN THE BLENDER OFF, WAIT UNTIL THE BLADES HAVE
STOPPED SPINNING, AND UNPLUG THE POWER CORD FROM THE
ELECTRICAL OUTLET BEFORE DISLODGING ANY FOOD ITEMS THAT
MAY HAVE GOTTEN STUCK.
HOW TO CLEAN
•
NEVER IMMERSE THE BASE OR THE ELECTRICAL CORD IN WATER OR ANY
OTHER LIQUID!
•
DO NOT USE ANY ABRASIVE SOAPS, DETERGENTS, OR CLEANING
MATERIALS TO CLEAN THIS APPLIANCE
•
ALWAYS MAKE SURE THE APPLIANCE IS OFF, UNPLUGGED FROM THE
ELECTRICAL OUTLET, AND COMPLETELY COOL BEFORE CLEANING.
1.
Disconnect the blender from the electrical outlet before beginning to
clean. (Figure 1)
2.
The jar and lid can be washed in warm soapy water or on the top rack of
the dishwasher using the low setting. (Figure 2)
