background image

 Keep Working

5

p) Do not use the coolant required accessories. Water or the other coolant

may cause electric corrosion or electric shock.

q) Take the double insulated cable with the same specifications as that of

tool please if you use an extension cable.

r) The automatic short circuit breaker (15mA) to protect the safety of the operator is necessary when 

using this tool in a damp, narrow workplace. The further safety instructions for the grinder operation:

Rebound and the relative warnings

The rebound is a sudden reaction force from the jammed or wound wheel in rotation, which has blocked 

the rotary accessories rapidly. As a result, the uncontrolled power tools and accessories generate the 

rotational direction opposite to the movement at the stuck point.

For example, the wheel may be climbed out or rebound if it has been twisted or jammed by the processed 

accessories.The wheel may fly to or fly from the operator according to the movement direction caused by 

the twisted or jammed wheel. Under these conditions, the wheel may be broken. The rebound is the 

result of misusage of power tools and / or incorrect operating procedures or criteria, which can be preven-

ted by the following 

Appropriate precautions.

a) Hold the power tools tightly, make your body and arm in the correct state to resist rebound. Use the 

auxiliary handle always if any, which can maximize control to the rebound or counter moment from the 

start. The operator can control the anti-torque or rebound if any appropriate precaution.

b) Do not close to the rotating accessory with hands since it may injure the hands.

c) Do not stand in the place where the power tool may be rebound and wound, drive the reverse action 

of power tool against the direction of movement of grinding wheel.

d) Be careful especially when operate with the corners, sharp edges, etc. to avoid accessories to be 

rebound and wound, because the corners, sharp edges, etc. operation may cause the risk out of control.

e) Do not assemble the saw chain, woodcarving blade or toothed saw blade because they will have 

frequent and uncontrolled rebound.

Summary of Contents for EP181



























Reviews: