Keep Working
www.ELITETOOLS.co
23
7. Installation and use of the TIG process
In TIG the gas must be
connected to the rear inlet of
the equipment, the torch
connected to the front gas
outlet of the equipment and the
torch trigger connector
connected in the respective
socket. The arc start is given by
HF start or lift start. The gas
used must be Argon or Helium,
the cylinder must have a
pressure regulator and a gas
flow of 6 to 10 l/min or 13 to 21
CFH is recommended
1.
Turn on the machine.
2.
Select the current according to the filler diameter to be melted.
3.
Cable connection: The TIG torch must be connected to the connector with negative
polarity and the work clamp with positive polarity.
4.
Connect the torch trigger cable and the torch gas fitting to the front of the machine.
GAS installation
Summary of Contents for EliteTIG AC/DC 225
Page 1: ......
Page 38: ...Keep Working www ELITETOOLS co 34 9 Despiece...
Page 41: ......
Page 78: ...Keep Working www ELITETOOLS co 34 9 SPARE PARTS LIST...
