Elite CSW-200, Installation Instructions Manual

Page: 15 / 33

M A S T E R A N D S L A V E W I T H T I M E R O F F
P A R T I A L M A S T E R / I N D I V I D U A L C O N T R O L
IN ORDER FOR THE FOLLOWING OPERATION TO OCCUR, FOLLOW THE INSTRUCTIONS.
EXAMPLE: There is a double gate, the entry gate is to be opened with a radio transmitter and
the exit gate with a free exit loop. Only one safety loop system is to open both gates, and a
fire department switch should open both gates at the same time.
1. Connect the radio receiver to entry gate only.
2. Connect the exit loop to exit gate only.
3. Connect the safety loop to both entry and exit gates.
4. Connect the fire department switch to both entry and exit gates.
1. Connect G from master to G of slave.
(G is the shield or a ground wire)
2. Connect B from master to B of slave.
3. Connect A from master to A of slave.
4. Set both Master and Slave pots to OFF position.
Use shielded
twisted wire