Zone Input Wiring
The EliteSuite LED Keypad is capable of connecting to 4 zone inputs,
each zone input can then be programmed to perform the required
function in the system.
The following diagrams show each of the zone wiring configuration
settings that are possible. The programmed zone configuration for
the EliteSuite LED Keypad is made in the option settings. Refer to the
General Options Section
on Page 17 for the programming of the zone
configuration.
When using a tamper input on a device the tamper contacts
must be normally closed and wired in series.
All resistors required to wire the zone configurations are
provided with the EliteSuite LED Keypad in the accessory bag.
Figure 4 - 2 Zone Input (No Resistors)
Figure 5 - 2 Zone Input (1K and 1K)
4
ELT-KLED EliteSuite Installation Manual