Ver. 1.1
www.elitescreens.com
/
Page 6 of 22
LCD remote control.
Or you can learn all functions of your original remote control to the keys on the LCD remote control you
want, and replace your original remote control.
In learn mode, you must need to prepare a another original remote control that you will take the codes into your
ZR800D
.
You can select
LEARN KEY
to learn commands, or
DELETE KEY
to delete
learnt commands, or choose
DELETE
DEV
to delete all commands under a device
,
or
DELETE ALL
for all learnt commands
under all device in learn category.
You can enter into the learning mode to press and hold
LEARN
key for more than 3 seconds.
Learn a Command
1. Press a device key (e.g.
TV
) where you want to learn to.
2. Press and hold the
SET
key for more than 3 seconds, then release it.
3. Scroll
or
key to
LEARNING
in the LCD menu, then press the
OK
key.
4. Scroll
or
key to
LEARN KEY
in the LCD menu and then press the
OK
key. The LCD displays
SELECT
KEY
.
5. Select the (
target)
key on your
ZR800D
you want to learn (e.g.
Power
).
6. Point the transmitter of the original remote control remotes face to the receiver window of
ZR800D
by approximately
20mm(please notice the distance) apart.
7. Press the POWER key on the
ZR800D,
the LCD displays
WAITING
;
Press and hold the
original
remote key (e.g.
Power
) until the LCD displays
SUCCESS
for 1 second. If LCD displays
FAILED
, please Repeat Steps 4-6. Do not
shake your original remote control and
ZR800D
when in learning process
.
8.
Repeat Steps 4-6 to learn more other keys.
9. Press a device key (e.g. TV) to quit the learn operation when all desired remote commands are learnt.