Ver. 1.1
www.elitescreens.com
/
Page 13 of 22
8. You check the function of the keys on remote control(such as the POWER or
CH+…etc). If most keys on your
new remote control do not function correctly, try another 3-digit device code (e.g.
004…
) from the list under the
same brand. Repeat steps 3 to 7 until all the basic functions operate correctly.
☆
4: Set up Clock
You can set up the clock on your
R800D
LCD remote control and the clock will be displayed on the screen.
1. Press and hold the
SET
key for more than 3 seconds, then release it.
2. Press the
or
key to select the
C O N F I G U R E
in the LCD menu, and then press the
OK
key.
3. Press the
or
key to select the
T I ME S E T U P
in the LCD menu, and then press the
OK
key.
4. Press the
or
key to move the cursor to select hour or minute or
AM/PM
, then press the number key to
set hour and minute, and press the
or
key to select
AM
or
PM
.
5. Press the
OK
key to save the setting and LCD display
SUCCESS
for 1 second then exit to current setup state,
if you enter errors the LCD screen shows
ERROR
for 1 second. You can press any
device
key to finish set up or
press
EXIT
key return to the last state.