PRODUCT WHITE PAPER
http://www.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Specifications
Thickness
Weight
Maximum Height
On-axis Gain
Half-Gain Angle
3.2 Gain and Viewing Angle Chart
Section 4: Execution
4.1 Setup Procedure
The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please
follow the instructions in this package. With proper care, your QuickStand screen will provide
many years of reliable service.
4.2 Two Section Frame
(For presentation screens that are less than 120” in diagonal measurement)
1.
Take the frame out of the case and remove its wrappings. Unfold the main joints as shown in (fig 1).
2.
Once the main joints are unfolded, make sure that the snap latches “click” into the
The frame should now be fully elongated as in (fig2).
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Taiwan Corp |Elite Screens Japan |Elite Screens Australia
0.27 mm (0.011”)
350 g/m
2
3.2 M (10 ft)
1.1
Does not reach half gain
Gain and Viewing Angle Chart
The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please
follow the instructions in this package. With proper care, your QuickStand screen will provide
r presentation screens that are less than 120” in diagonal measurement)
Take the frame out of the case and remove its wrappings. Unfold the main joints as shown in (fig 1).
Once the main joints are unfolded, make sure that the snap latches “click” into the
The frame should now be fully elongated as in (fig2).
*Note: The snap latches will automatically
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please
follow the instructions in this package. With proper care, your QuickStand screen will provide
Take the frame out of the case and remove its wrappings. Unfold the main joints as shown in (fig 1).
locked position.
*Note: The snap latches will automatically
