Rev.041717-DR
www.elitescreens.com
6
Screen Material Removal
Follow the steps to properly remove the screen material from the frame. This procedure will ensure prolonging the
life of the screen material.
1.
Detach the velcro from the frame.
2.
Gently pull back the material to release the material from the velcro connections on the corners.
Support bar installation (for models under 135”)
:
1.
Position the
center support bar (E)
in the middle of the frame and align the hole on each end of the support
bar with the
M6 hex screws
on the top and bottom frames. Then fasten with the
M6x12 screws.
Pull back the screen material from
the velcro connection along the
edges of the frame to detach it.
Attach in the following sequence: a-b-c-d
A
B
C
D
Move the
M6 hex screw
to the middle area of the frames.
Support bar