Edge Frame Projection Screen
User’s Guide
Rev.10252019MZ
4
7.
Make sure all four corners are properly in place to form a perfect square. Then fasten the four
angles with the
M5x15 Screws (G
).
Screen Material Installation
1.
Lay the
screen material
completely flat with the front facing down on a clean surface in a horizontal
position. The back side of the screen material should be placed upwards.
Note: The back side of the material has the velcro borders all around the edges.
2.
Carefully and gently place the assembled frame on top the screen material as shown below. Make sure
to not allow the angle edge of the frame to come in direct contact with the screen material to avoid
puncturing it.
Four corners join correctly to form a
perfect square. Use the included
screwdriver (J) to fasten the M5x15
screws (G) into each corner by aligning
the frame screw holes to the holes in the
elbow joint (A).
Screen material back facing up
Screen material comer
