Remote control and 3 & 4 prong wire information
16.2 mm. in width
Rev. 1.1
Up
Stop
Down
1”1/2
IR Receiver
The 4 prong cable will be
connected from the control
to the screen.
6.02 mm. in width
Up
Stop
Down
2”7/8
13.9 mm. in width
The receiving box can be hidden
from sight, by simply using the
RF remote you will still have
access to control the screen. The
wire are standard 3 and 4 prong
wires 99” inches in length. When
properly installed you will see the
LED light up in red. This is a
feature on the box that will
indicate it is working properly. If
the LED light does not turn on
please disconnect and reconnect.
When pressing the button you
should hear a clicking sound,
signifying it is sending the signal
to the screen.
The 3 prong cable will
be connected from the
outlet to the control box.
This
is the
IR
(Infra-Red) remote with
a range of 15 Ft. Battery size AAA
This is the
RF
(Radio Frequency) remote
with a range of 30 Ft. Battery size AAA
** Please remember to always point to the wall switch receiver when using the IR remote. The IR remote can also work with a
Universal Learning Remote Control usually by programming the Screen’s IR codes in your Universal Learning Remote.
