User manual
AR2
(Screw adjustment type)
Rev. V210929DT
Elite Screens China Corp.
11
Edge trim Installation
1.
Place the
Edge trim
(D) on the four sides of the frame installed with the screen material. (Note:
the
edge trim
affixed with LOGO is installed on the bottom frame right of the screen, and the side
affixed with product label on the back of the screen is the bottom frame.)
2.
Place all the trim pieces along the edge of screen material Adjust the trim so that the top and
bottom trim pieces are touching and show no gaps in the center. Then Align the
M3x8 screw
(G)
with the A & B holes as below picture shown.
Edge trim
(D)
※
Assembly section diagram of edge trim
M3x8 screw (G)
Screen material
(O)
Verify that product labels are attached
Decorate the trim for the bottom frame
A
B
