042717DR
2
Hardware and Parts List
Please make sure all parts listed below are included before installation.
A. Elbow joint x4 pcs
B. Top/Bottom horizontal frame
x4 pcs
C. Left/Right vertical frame x2 pcs
D. Center joints x2 pcs
E. Center support bar x1-2 pcs
F. Wall brackets x2-3 pcs
G. M5x15 screw x24 pcs
H. Screw driver x1 pc
I. Rubber mallet x1 pc
J. Screw and anchor x 6-9 pcs
K. Black Tape x1 bag
L. Bezel trim x6 pcs
M. Corner sleeve x4 pcs
N. White gloves x2 pcs
Frame Assembly
1.
Insert the center joint into one of the ½ horizontal frames and fasten it with the two
M5x15 screws
(H)
.
2.
Insert the other ½ horizontal frame piece to the center joint and fasten also using two
M5x15 screws
.
3.
Repeat steps 1 and 2 for assembling the second horizontal frame.
Push Push
4.
Insert the
elbow joint (A)
into each end of the
horizontal frames (B)
as shown below.
Horizontal long frame (B)
Elbow Joint (A)
Push
Elbow Joint (A)
Horizontal frame
Top right Frame
Top left Frame
Center joints
