%763($.(5352-(&725212))
%763($.(5352-(&725212))
%763($.(5352-(&725212))
*Note:
Press the Wireless Speaker button / PJ button to turn off Wireless Speaker / projector before press power off switch.
Avoid press power off switch directly when projector / Wireless Speaker still on
18
19
7
7
*Note:
An audible tone sounds when the
Wireless Speaker
powers on/off,
or when the projector connects/disconnects to a device.
Press the Wireless Speaker button to activate this
feature.It’s blue LED lamp will flash when the
Wireless Speaker is in pairing mode. Check
“MosicGO
®
” on your device to connect to
MosicGO
®
Wireless Speaker . When device is
connected successfully, the blue LED lamp will
light persistently.To turn off the Wireless Speaker,
press down and hold the BT button for over 1
second.When both projector and Wireless
Speaker are ON, short pressing the Wireless
Speaker button on the remote control will switch
audio source between projector and Wireless
Speaker.
Press the PJ button to turn the projector on and
the status LED indicator will light up. To turn off
the projector, press and hold the PJ button for
over 1 second. After seeing prompt message,
short press PJ button again to confirm. The
MosicGO
®
logo will show briefly before the device
powers off.The status LED indicator light will be
flashing as the projector powers down.When
projector is ON, short pressing the PJ button on
the remote control will cycle through the following
brightness modes: MAX, ECO, and MIN.
1.
2.
for more update user manual:
Electronic file link
www.eliteprojector.com/MGFU/manual
www.eliteprojector.com
P r i n t e d i n T a i w a n
FBZZ-MG1Z002-03
