6 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
CLEANING & MAINTENANCE
1. Be sure the toaster is unplugged from the electrical outlet
and that it has completely cooled before cleaning.
2. Wipe the toaster exterior with a clean, damp, soapy cloth.
Do not use abrasive cleansers or cleaning materials.
3.
DRY THOROUGHLY BEFORE REASSEMBLING FOR USE OR
FOR STORAGE.
CAUTION:
Never immerse the
toaster or plug in
water or any other
liquid.
TO CLEAN THE CRUMB TRAY:
1. This appliance has a drop open Crumb Tray at the bottom
of the toaster. First unplug the appliance and allow to
completely cool. To clean out the crumbs, simply tilt the
unit backwards and push the ‘Crumb Tray Slide Fastener’
towards the rear, down, allowing it to drop on counter top.
(Figure 1)
2. Wipe interior of crumb tray with a damp cloth.
3.
After cleaning, push the ‘Crumb Tray Slide Fastener’ down
and in to lock the crumb tray back into place.
4. It is recommended to clean the crumb tray regularly.
NOTE:
Toaster must be
completely cool and
not in operation
or plugged into an
electrical outlet before
cleaning or removing
the crumb tray.
TO REMOVE LODGED TOAST:
1. Unplug the toaster and allow it to cool.
2. Turn the toaster upside down
3.
Shake whatever is stuck loose.
Never use a fork or
sharp-edged utensil
to remove toast or try
to remove anything
that is stuck inside the
toaster while it is in
operation or plugged
in. Doing so may
damage the heating
element and cause
severe personal injury.
-
-
Figure 1
