Rev. 12/6/18
7
eliteproav.com
Magnetic bottom bracket Installation
1.
After the screen is plugged in to a power outlet, press the DOWN button on the RF remote control
(F).Install the magnetic bottom bracket (G) so that the weight bar sleeve cradles inside (see picture below).
Note: The screen should deploy straight down and align with the magnetic bottom bracket (G). Once the
weight bar is cradled inside the magnetic bracket, the screen will be from movement.
2.
Mark the drill-hole area of where the bracket is to be installed with a Maker or Pencil.
3.
Raise the screen UP using the RF remote control. Next, drill holes to insert the M8 x35 Anchor (C) if
installing to a dry wall. Then affix the magnetic bottom bracket (G) on the marked location and secure it
with an M4x35 Screw(C).