Elite ProAV Yard Master Electric Series User Manual Download Page 2

Rev. 12/6/18 

eliteproav.com

 

 

Important Safety & Warning Precautions 

Make sure to read this user’s guide and follow the procedures below. 

 

Please retain this user’s guide for future reference. 

 

To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the 
manufacturer.  

 

Handle the unit carefully during transportation to avoid any damages. 

 

To ensure safe and reliable operation, direct connection to a properly grounded power source is 
advised. 

 

The power outlet supplying power to the unit should be close to the unit and easily accessible. 

 

Do not install the unit on uneven or inclined surfaces. 

 

Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle. 

 

Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short 
circuit. 

 

There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. 
No one except authorized technicians can open and make repairs to this unit. 

 

Make sure the power source this unit is connected to has a continuous power flow. 

 

If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to 
avoid overheat. 

 

Do not handle the power plug when your hands are wet or your feet are in contact with water. 

Do not use this unit under the following circumstances. 

 

Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

 

 

Avoid direct Sunshine, rain shower and moisture.

 

 

Keep away from fire sources and high temperature to prevent this device from overheating.

 

 

Cut off the power supply first before transportation or maintenance.

 

 

Fully disconnect from the power supply when the unit is not in use for a long period of time, as 
should be done with any other electric household appliance.

 

 

To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious 
damage or if there are any evident broken parts.

 

 

WARNING

 

The Screen’s 

Top Black Drop

 is already set to its maximum drop distance. There is 

NO

 extra top black drop 

in the roller. Please be aware of this as it will void the limitation of your warranty. 
Individual modifications to this product are prohibited and will void the warranty with the manufacturer.  
Please contact Customer Service for any questions. 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. 
 
These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
 
However, there is no guarantee that the interference will not occur on a particular installation. If this 
equipment causes harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures. 

 

Reorient or relocate the receiving antenna of the device which may be causing the interference. 

 

Increase the separation between the screen and the device’s receiver. 

 

Connect the equipment into a different power outlet other than the device. 

 

 

Summary of Contents for Yard Master Electric Series









Reviews: