Rev. 041217 DR
www.eliteproav.com
3
B. Preparing the tripod screen for projection:
Follow the steps below and refer to
Fig. 3
＆
4
Note: At least 2 people are needed to set up the screen. Due to the height of the screen when extended,
the use of a stool is recommended to properly hook the handle to the keystone eliminator.
1. While one person holds the casing horizontally leveled, the other person will need to stand on the
stool and
pull the screen handle up vertically and hook the screen handle on the
Top Hook
as
shown in fig. 3 & 4.
2. Twist the
Vertical Locking Sleeve Ring counter-clockwise
to loosen the
Vertical Extension
Bar
so that you can adjust the screen
to your desired height
.
Follow the steps below and refer to
Fig.5
3. Pull the
Screen Height Adjustment Lock/Release tab
out (to the left), which is located just
above the
Carrying Handle
to raise or lower the casing. Once the desired height has been set,
push the tab back into the locked
position. Follow the steps below and refer to
Fig 6.
Rotate the casing so that it is
parallel to the ground as shown
here.
fig.2
fig.1
3
2
4
1
fig.3
fig.4