Rev. 041217 DR
www.eliteproav.com
2
Tripod Screen Parts Diagram
A. Screen set-up
Follow the steps below and refer to
Fig. 1
＆
2
.
1. Place the screen in an upright position (fig.1) with the legs toward the ground.
2. Spread the Tripod Support legs by pushing down on the legs’ junction as shown in fig.2.
3. Rotate the tripod's casing in a 90-degree horizontal position so that the screen’s casing is now
parallel to the ground and the screen’s handle is positioned at the top of the casing.
4. Completely extend the legs as much as possible so they are stable and position them away from
objects that may interfere with their balance.
DO NOT
stand the tripod on an uneven platform to avoid injury should the tripod screen collapse.
Screen Material
End Cap
Screen case
Curtain
Top Hook and Screen Handle
Vertical locking sleeve ring
Double lock structure
Carrying handle & Screen height
adjustment double lock/release tab
Tripod Support Legs
Support beam
Vertical
Extension Bar