V03182021-JA
www.eliteproav.com
6
How to avoid getting ripples on the screen material’s projection surface.
Solution: Pull and smooth out the material using your hand from the center to the corners, creating a
nicely taut surface as shown below.
Attention: Do not proceed with the Edge Trim installation until making sure there are no ripples
in the material.
Edge Trim Installation
Step 12
: Place the
Edge Trim
over each end of the frame and secure with
M4x6screws (c)
.
Start with the center points first, then the rest of the corners as shown below.
Step 13
: Installthe
angle cover(j)
on each corner of the frame and install the LED light strip to hold down the
angle cover.
Then insert the
LED light clip (l)
to hold the LED light strip in place.
1
1
2
2
2
2
