V03182021-JA
www.eliteproav.com
4
Screen Material
Step 7:
Put on the
white gloves
(m) and carefully unroll the screen material on a clean surface from the roller
to the other side as shown below. The back side of the screen material should be placed upwards.
Step 8:
Insert the
fiberglass rods (n)
through the openings. The longer rods are used on the vertical edges of
the screen material, and the shorter rods are used on the horizontal edges, as shown below.
Step 9:
Carefully and gently place the assembled frame on top of the screen material. Make sure to not allow
the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.
Step 10:
With one end of the spring and secure inside the groove of the frame, use the
spring hook (d)
to
attach the spring to the hole located on the screen material’s outer edge in the following order.
Attach the four corners first (1). After those are secure, connect the vertical portions of the material, begin in
the center and move towards the corners (2). Lastly, connect the horizontal sections of the material by
connecting the center of the material and make your way towards the corners (3).
Back side
Back Side
RFront
