09252018-JA
www.eliteproav.com
3
Attaching the screen material to the frame
1.
Make sure the screen material and frame are both lying face down on a clean, dry, and non-abrasive surface.
2.
Carefully unroll the material inside the frame.
Please note the material will be noticeably smaller than the frame, as the material must be stretched to create sufficient
amount of tension to achieve a smooth flat projection surface.
3.
Insert the fiberglass rods separately into the edges of all four corners of the material.
Fiberglass Rod (Vertical) x 2
Fiberglass Rod (Horizontal) x 4
Fiberglass Rod (Horizontal) x 4
Fiberglass Rod (Vertical) x 2
Four corners join correctly to form a perfect
rectangle. Use the included
allen wrench
to
fasten the
M6x30 screws (C)
into each
corner by aligning the frame screw holes to
the holes in the
elbow joint (A)
.
