09252018-JA
www.eliteproav.com
2
Frame Assembly
1.
Insert the center joint into one of the ½
horizontal frames
(B) and fasten it with the two
M6x10 screws(K)
.
2.
Insert the other ½ horizontal frame piece to the center joint and fasten also using two
M6x10 screws(K)
.
3.
Repeat steps 1 and 2 for assembling the second horizontal frame.
Push Push
4.
Place the assembled top and bottom frame on the protective film and insert three
connectors
(I) into the bottom
frame, and two
connectors
(I) into the top frame.
5.
Insert the
Elbow joint
(A) into each end of the
horizontal frame
(B) as shown below. Then insert the two
vertical frames
(B) into the
Elbow joint
(A).
Note: Make sure all four corners are properly in place to form a perfect square. Then fasten the four angles
using the supplied
M5 allen wrench
with the
M6x30 Screws
(C).
Top right Frame
Top left Frame
Center joints
Vertical short frame(B)
Connector (I)
Insert 2 connectors
into the top frame
Insert 3 connectors
into the bottom frame
protective film
Horizontal long frame (B)
Elbow joint (A)
Locating hole
on the frame
Plug pin
on the Elbow joint
M6*30 Screws (C)
Vertical short frame (B)
Vertical short frame (B)
Horizontal long frame (B)
framex B)
Horizontal long frame (B)
framex B)
Note: Connectors (I) are for the Wall Bracket (E) and Support Bar (G) installation
