Elite Models aviator pro 120, Instruction Manual

Page: 17 / 24

www.valuehobby.com/aviator-120-arf.html
17
Section8. Rudder Servo Installation
Step1. Install the torque rod, centered, in the
rudder. Tighten both torque rod nuts. Be sure use
thread locker on the threads.
Step2. Remove the covering for rudder servo steel
wire on both sides of the fuselage.
Step3. Prepare a servo with push-push servo horn.
Step4. Install the threaded cable coupler to the ball
link.
Step5. Install the ball link to the servo horn using
M3*15mm socket head screw, M3 nut and washer.
Ste6. Install the servo to the servo tray using the
self-tapping screws provided with the servo.