3
PACKAGE CONTENTS
Qty. (1) Multi-Mode Stimulator
Qty. (1) Patient Lead Wire Assembly
Qty. (1) Patient Instruction Manual
Qty. (1) Electrodes
Qty. (4) AA Alkaline Batteries
Qty. (1) Carrying and Storage Case
Optional Accessory
Qty. (1) AC Wall Adapter
WARNING
- Only use the supplied UL
approved AC wall adapter. Use of any other
type or brand of wall adapter may cause
damage to the device.
Please read this manual carefully to become familiar with the
before using it.
INTRODUCTION TO ELECTROTHERAPY
True interferential stimulation produces a different stimulation frequency through
“interference” frequency that does change depending on the therapy protocol. When
these two stimulation frequencies cross and “interfere” with each other within the
body, the two frequencies subtract resulting in a third frequency, which is the thera-
peutic frequency “seen” by the targeted injury site. This phenomenon of subtracting
two frequencies to create a third frequency is called “beating”.
The Multi-Mode Stimulator uses a carrier frequency of 4000Hz (hertz or cycles per
second). At this frequency the skin impedance or resistance to the stimulation is at
discomfort for the patient. Interferential stimulation is used to treat chronic and
traumatic pain.
Depending on the pre-set therapy protocol selected, the interference frequency
utilized by the Multi-Mode Stimulator may vary between 4001 to 4150Hz. The
