12
DEVICE CONTROLS
STOP!
Do not use the Multi-Mode Stimulator until you have read the
entire instruction manual, especially the warnings and precautions on
pages 5-6
.
STANDARD OPERATION INSTRUCTIONS
1. Begin by placing the electrodes on your skin at the treatment location. Follow
your healthcare professional’s instructions as to the correct placement of the
on the proper placement and attachment of the electrodes. Use care at this
important step.
2. Make sure the stimulator is turned OFF. Connect the lead wires to the elec-
trodes and connect the opposite end to the therapy cable connector on the top
of the stimulator.
3. Turn the stimulator ON. In a few moments, you will see a screen asking you
to make a therapy selection. Using the “+” and “-” buttons scroll through the
protocols until you locate the desired therapy protocol.
4. Press ENTER to select the therapy protocol. The therapy has begun but the
amplitude is set at zero. Increase the amplitude to the level recommended by
your healthcare professional. Use the “+” or “-” buttons to adjust the amplitude
to your desired level.
DC Power Jack
Amplitude increase
and decrease, also
menu scroll buttons
OFF / PAUSE button
Therapy Cable
Connector
LCD Display
ON / ENTER Button
DC Power Jack
Amplitude increase
and decrease, also
menu scroll buttons
OFF / PAUSE button
